The Infinite
Smaller Than A Mobile Phone
Ultra small body
After storage, the entire device measures only 53mm in length, 39mm in width and 126mm in height, taking up no space at all.
weight
Applicable To Various Containers
Various containers can be used as water reservoir for flushing teeth. Even if there is no container.
As long as the bellows can be placed in the water flow, flushing teeth can be performed.
Built-In Inlet Hole
The inside of the water flosser is specially designed with an inlet hole for the tip and sylphon bellows.
There is no need to bring a separate storage box, and it is easy to carry and use outside.
After use, you only need to remove the tip and place it in the inlet hole, then fold the bellows and put it into the Inlet hole, put on the water reservoir and you can take it away.
Wireless Charging
This elegant and minimalist magnetically attached wireless charger simply needs to be placed on top of the device in order to start charging it.
battery
of charging
of work
IPX7 Waterproof Can Be Used In Shower
The entire body is ultrasonic welding and has no holes, so it can be submerged in 1 meter deep water for up to 1 hour without getting wet, and has superb waterproof capabilities.
Best Telescopic Ratio
The maximum stretching length of telescopic sylphon bellows can reach 80cm, and the shortest length can be completely retracted into the fuselage.
Small And Protable
The structure of the whole main body is continuously adjusted to make it as small as a palm and as light as 206g, creating a powerful portable oral care expert that can be easily put into a bag.
Integrated Button
The buttons adopt an integrated design to avoid dirt and grime, while significantly improving their waterproof performance.
Touch Slide Bar To Adjust 24 Levels Of Impact
The integrated button can be long pressed to cycle through 3 modes. Each mode has 8 levels of water pressure. Touch the slide bar and slide your finger lightly to adjust 8 levels of pressure. One-button start and simple operation make it easy for novices to get started.
How To Use
1
Remove the water reservoir that comes with the water flosser and place it directly under the faucet.
2
Stretch the sylphon bellows out of the inlet hole, take out the tip that is stored in the inlet hole, put the tip into the water outlet hole, rotate the buckle, and complete the installation.
3
Stretch the sylphon bellows to the longest length and put it into the water reservoir.
4
Turn on the faucet to connect water and adjust the faucet switch to the minimum water output.
5
Quickly click the integrated button or hold the device to activate it. Long press the integrated button to select the mode.
6
Touch and slide the slide bar with your finger to slide up and down to select the gear force.
7
Quickly click the integrated button to turn on the water flosser and flush your teeth.